MIDWEST MOTOR SUPPLY CO INC DBA KIMBALL-MIDWEST -- 80-695 HEAVY DUTY SILICONE -- 6850-00F048220
===================== Product Identification ===================== Product ID:80-695 HEAVY DUTY SILICONE MSDS Date:09/01/1994 FSC:6850 NIIN:00F048220 === Responsible Party === Company Name:MIDWEST MOTOR SUPPLY CO INC DBA KIMBALL-MIDWEST Address:562 W GOODALEVE Box:2470 City:COLUMBUS State:OH ZIP:43216-5000 Country:US Info Phone Num:614-228-6701 Emergency Phone Num:614-228-6701 CAGE:6H404 === Contractor Identification === Company Name:MIDWEST MOTOR SUPPLY CO INC DBA KIMBALL-MIDWEST Address:562 W GOODALEVE Box:2470 City:COLUMBUS State:OH ZIP:43216-5000 Country:US Phone:614-228-6701 CAGE:6H404 ============= Composition/Information on Ingredients ============= Ingred Name:HEXANE, N-HEXANE CAS:110-54-3 RTECS #:MN9275000 Fraction by Wt: 30-40% Other REC Limits:50 PPM OSHA PEL:50 PPM ACGIH TLV:50 PPM EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB Ingred Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE CAS:64742-89-8 Fraction by Wt: 20-30% OSHA PEL:400 PPM Ingred Name:DIMETHYL POLYSILOXANE (MONOMER: DIMETHYL SILOXANE), SILICONE FLUID, DOW CORNING 200, POLYMETHYLSILOXANE CAS:63148-62-9 RTECS #:JT6484500 Fraction by Wt: 1-10% Ingred Name:PROPANE (DIMETHYLMETHANE) *96-1* CAS:74-98-6 RTECS #:TX2275000 Fraction by Wt: 30-40% Other REC Limits:1800 MG/CUM OSHA PEL:1000 PPM ACGIH TLV:1000 PPM Ingred Name:CYCLOHEXANE CAS:110-82-7 RTECS #:GU6300000 Fraction by Wt: 4% Other REC Limits:300 PPM OSHA PEL:1050 MG/CUM ACGIH TLV:1030 MG/CUM EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:PROPRIETARY INGREDIENTS Fraction by Wt: 3% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES/SKIN: IRRITANT. EFFECTS ARE REVERSIBLE. INHALATION: LONG TERM EXPOSURE MAY CAUSE LUNG, LIVER/KIDNEY DAMAGE, MAY IRRITATE RESPIRATORY TRACT. SOLVENTS MAY AFFECT THE CENTRAL NERVOUS SYSTEM. INGESTI ON: ASPIRATION HAZARD. HEXANE: MAY DAMAGE PERIPHERAL NERVE TISSUE. Explanation of Carcinogenicity:NONE Effects of Overexposure:DIZZINESS, NARCOSIS, DEFATTING, IRRITATION, DIFFICULTY BREATHING, REDNESS, VOMITING. Medical Cond Aggravated by Exposure:HEART DISEASE, RESPIRATORY DISORDERS. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. KEEP CALM & QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:-142F Lower Limits:1.8 Upper Limits:9.5 Extinguishing Media:WATER FOG, DRY CHEMICAL, CO2 Fire Fighting Procedures:WEAR NIOSH APPROVED POSITIVE PRESSURE SCBA. Unusual Fire/Explosion Hazard:HEATED CANS MAY BURST. ================== Accidental Release Measures ================== Spill Release Procedures:USE ABSORBENT SWEEPING COMPOUND TO SOAK UP MATERIAL. PUT INTO CONTAINER. DISPOSE AS HAZARDOUS WASTE. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME. STORE AT TEMPS >120F. Other Precautions:WHEN SPRAYING MORE THAN 1 HALF CAN CONTINUOUSLY/MORE THAN ONE CAN CONSECUTIVELY, USE NIOSH APPROVED RESPIRATOR. DON'T SMOKE WHILE USING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WHEN SPRAYING MORE THAN 1 HALF CAN CONTINUOUSLY/MORE THAN 1 CAN CONSECUTIVELY, USE NIOSH APPROVED RESPIRATOR/USE SCBA IF TLV LIMITS ARE EXCEEDED. Ventilation:LOCAL EXHAUST: SUFFICIENT TO MAINTAIN VAPOR CONCENTRATIONS BELOW TLV. Protective Gloves:NONE REQUIRED IF SPRAYING Eye Protection:REQUIRED Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:-40 TO 212F Vapor Pres:45 Vapor Density:4 Spec Gravity:0.6 Evaporation Rate & Reference:(BU AC = 1): >1 Solubility in Water:0 Appearance and Odor:CLEAR W/SOLVENT ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS Stability Condition to Avoid:HIGH TEMPS, HEAT, SPARKS, OPEN FLAME, TEMPS <120F. Hazardous Decomposition Products:CO2, WATER, SILICONE DIOXIDE ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.