MILES LABORATORIES,INC -- CUTTER INSECT REPELLENT SPRAY -- 6840-01-003-9590
=====================  Product Identification  =====================

Product ID:CUTTER INSECT REPELLENT SPRAY
MSDS Date:01/01/1987
FSC:6840
NIIN:01-003-9590
=== Responsible Party ===
Company Name:MILES LABORATORIES,INC
Address:7123 W 65TH  ST
City:CHICAGO
State:IL
ZIP:60638-4605
Country:US
Emergency Phone Num:312-458-2004
CAGE:6N841
=== Contractor Identification ===
Company Name:MILES INC, HOUSEHOLD PRODUCTS DIV
Address:7123 W 65TH  ST
Box:City:CHICAGO
State:IL
ZIP:60638-4605
Country:US
Phone:219-264-8400/412-681-6669(MEDICAL)
CAGE:62801
Company Name:MILES LABORATORIES, INC
Address:7123 WEST 65TH STREET
Box:932
City:CHICAGO
State:IL
ZIP:60638
Phone:(312) 458-6100
CAGE:6N841

=============  Composition/Information on Ingredients  =============

Ingred Name:N,N-DIETHYL-META-TOLUAMIDE,CAS#134-62-3
CAS:134-62-3
RTECS #:XS3675000
Fraction by Wt: 17.1%

Ingred Name:OTHER ISOMERS (O,P),CAS#2728-4-3;CAS#2728-5-4-RTEC
    NO.CORRESPONDS TO CAS#2728-4-3
CAS:2728-04-3
RTECS #:XS3850000
Fraction by Wt: 0.9%

Ingred Name:DIMETHYL PHTHALATE,CAS#131-11-3
RTECS #:TI1576000
Fraction by Wt: 12.0%
ACGIH TLV:5MG/CM(ACGIH)

Ingred Name:DI-N-PROPYL ISOCINCHOMERONATE,CAS#136-45-8
CAS:136-45-8
RTECS #:US8000000
Fraction by Wt: 1.0%

Ingred Name:N-OCTYL BICYCLOHEPTENE DICARBOXIMIDE,CAS#113-48-4
CAS:463-04-7
RTECS #:RB8575000
Fraction by Wt: 1.0%

=====================  Hazards Identification  =====================

Effects of Overexposure:MAY CAUSE SKIN REACTION IN RARE CASES.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT:FLUSH WITH COPIOUS AMOUNTS OF WATER,IF IRRITATION
    PERSISTS,CONSULT A PHYSICIAN;IF SWALLOWED,CONTACT A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:140F,60C,TOC
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:CO*2,FOAM
Fire Fighting Procedures:SM FIRE:CO*2,DRY CHEM;LIG FIRE:ALC.TYPE
    FOAM-KEEP CONT. COOL
Unusual Fire/Explosion Hazard:AT TEMP. OVER 130F,CONT. MAY
    VENT,RUPTURE,BURST

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
    WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
    SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
    TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT  DURING CLEAN UP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
    RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
    CLOSED.
Other Precautions:DO NOT EXPOSE TREATED SKIN TO FIRE,SPARKS OR FLAME
    UNTIL LIQ. HAS EVAP-APPLY ONLY TO SKIN OR CLOTHING,DO NOT
    INGEST,KEEP OUT OF EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED 10-21-85/OTHER INGRED:HYDROCARBON PROPELLANT;INERT
    INGREDIENTS/MFR STATES PRODUCT IS NON-FLAMMABLE/

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:40
Vapor Density:2.1
Spec Gravity:0.993
Evaporation Rate & Reference:1 (IPA=1)
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT AMBER LIQUID W. ODOR OF ISOPROPANOL
Percent Volatiles by Volume:63

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY SOFTEN/DAMAGE SYNTHETICS LIKE RAYON;MAY DAMAGE LEATHER.
Stability Condition to Avoid:AVOID TEMPS ABOVE 120F;AVOID FIRE,OPEN
    FLAME
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINER,GIVE TO
    DISPOSAL SERVICE-DISPOSE OF IAW LOCAL,STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.